RADIATION CURABLE MATERIALS

TUV-100 Adhesive is a solvent-free, single component liquid which cures to a hard solid when exposed to ultraviolet (UV) radiation. TUV-100 is a high Tg adhesive with fast cure and excellent adhesion to a wide range of materials. Curable up to 20 mil thick, TUV-100 tolerates wave soldering without degradation. TUV-100 is ideal when a secondary heat cure is desired.

PROPERTIES:

 

TUV-100

Viscocity

14,800 cp @ 25°C

Tensile Strength (psi)

1620

Elongation (%)

0.7

Tg (°C)

303

Durometer, Shore D

85

Water Immersion

No effect

Cure Thickness

To 20 mil

Cure Time

< 1 to 20 seconds

Wavelength response (nm)

240-250, 320-335, 360-365, 405

Secondary Heat Cure

30 min @ 110°C

Heat Stability

Wave Solderable
Stable 1 hr @ 100oC

Performance

Hard, clear, hybrid cure


APPLICATION:

TUV-100 may be applied via syringe and cured in 1-20 seconds depending on lamp intensity. High viscosity allows for delay between application and cure. Secondary cure may be effected by heating at 110oC for 30 minutes.